Logitech Mobile Headset

I recently purchased a Logitech Mobile Freedom Headset top use with my
Siemens S55 via Bluetooth. Set it up, works perfectly in that I can answer
calls using the headset and make calls from the headset by voice command
(pre-stored entries)
My question is with being able to dial a number on my handset and have it
automatically come through the headset. I have enabled 'Headset' profile but
this doesn't do it automatically. I have to allow the call to connect, and
then select/transfer 'call to headset' on the menu that appears. Siemens
support have confirmed that this happens with their headsets as well, but
they said that Logitech may have a workaround.

Anyone had any experience with this?

In <kyNwd.76788$K7.43241@news-server.bigpond.net.au> Jabba wrote:
> I recently purchased a Logitech Mobile Freedom Headset top use with
> Anyone had any experience with this?
>
>

I am afraid this is how the S55 works, with a Plantronics headset you
would be able to do a short button press on the headset to transfer the
call to the headset.

pzboyz

In <kyNwd.76788$K7.43241@news-server.bigpond.net.au> Jabba wrote:
> I recently purchased a Logitech Mobile Freedom Headset top use with
> Anyone had any experience with this?
>
>

I am afraid this is how the S55 works, with a Plantronics headset you
would be able to do a short button press on the headset to transfer the
call to the headset.

pzboyz

"Jabba" <cymry2002@notmail.com> schrieb im Newsbeitrag
news:kyNwd.76788$K7.43241@news-server.bigpond.net.au...
> I recently purchased a Logitech Mobile Freedom Headset top use with my
> Siemens S55 via Bluetooth. Set it up, works perfectly in that I can answer
> calls using the headset and make calls from the headset by voice command
> (pre-stored entries)
> My question is with being able to dial a number on my handset and have it
> automatically come through the headset. I have enabled 'Headset' profile
> but this doesn't do it automatically. I have to allow the call to connect,
> and then select/transfer 'call to headset' on the menu that appears.
> Siemens support have confirmed that this happens with their headsets as
> well, but they said that Logitech may have a workaround.
>
> Anyone had any experience with this?
>
>

Good to hair that Logitech Freedom BT Headset works with S55.
I can receive calls, but have still problems to make a call.
What firmware S55 you are using? (91)
When I go in my S55 phone book an dial a number it does not work via
headset.
Any advice?
Best regards Thomas

I was using the previous firmware but upgraded to 91 tonight. Siemens &
Logitech have confirmed that even when using the Headset Profile, a call
dialled on the handset will not automatically be routed through the headset.
You have to wait till the call connects, then select <phone symbol> menu,
then 'call to handsfree'

Alternatively you can call using voice commands to previously recorded
entries in your address book

"Thomas Schlimper" <forester08@gmx.de> wrote in message
news:33549gF3ttsv8U1@individual.net...
>
> "Jabba" <cymry2002@notmail.com> schrieb im Newsbeitrag
> news:kyNwd.76788$K7.43241@news-server.bigpond.net.au...
>> I recently purchased a Logitech Mobile Freedom Headset top use with my
>> Siemens S55 via Bluetooth. Set it up, works perfectly in that I can
>> answer calls using the headset and make calls from the headset by voice
>> command (pre-stored entries)
>> My question is with being able to dial a number on my handset and have it
>> automatically come through the headset. I have enabled 'Headset' profile
>> but this doesn't do it automatically. I have to allow the call to
>> connect, and then select/transfer 'call to headset' on the menu that
>> appears. Siemens support have confirmed that this happens with their
>> headsets as well, but they said that Logitech may have a workaround.
>>
>> Anyone had any experience with this?
>>
>>
>
> Good to hair that Logitech Freedom BT Headset works with S55.
> I can receive calls, but have still problems to make a call.
> What firmware S55 you are using? (91)
> When I go in my S55 phone book an dial a number it does not work via
> headset.
> Any advice?
> Best regards Thomas
>

Thanks for you Feedback.

This is a killer feature for me.
I mean, when the call is not routed to the headset I have to return it. Its
a must.

What you mean with using Headset profile? In which S55 menu you can edit it?
Best regards Thomas

"Jabba" <cymry2002@notmail.com> schrieb im Newsbeitrag
news:5zezd.88184$K7.21790@news-server.bigpond.net.au...
>I was using the previous firmware but upgraded to 91 tonight. Siemens &
>Logitech have confirmed that even when using the Headset Profile, a call
>dialled on the handset will not automatically be routed through the
>headset. You have to wait till the call connects, then select <phone
>symbol> menu, then 'call to handsfree'
>
> Alternatively you can call using voice commands to previously recorded
> entries in your address book
>
> "Thomas Schlimper" <forester08@gmx.de> wrote in message
> news:33549gF3ttsv8U1@individual.net...
>>
>> "Jabba" <cymry2002@notmail.com> schrieb im Newsbeitrag
>> news:kyNwd.76788$K7.43241@news-server.bigpond.net.au...
>>> I recently purchased a Logitech Mobile Freedom Headset top use with my
>>> Siemens S55 via Bluetooth. Set it up, works perfectly in that I can
>>> answer calls using the headset and make calls from the headset by voice
>>> command (pre-stored entries)
>>> My question is with being able to dial a number on my handset and have
>>> it automatically come through the headset. I have enabled 'Headset'
>>> profile but this doesn't do it automatically. I have to allow the call
>>> to connect, and then select/transfer 'call to headset' on the menu that
>>> appears. Siemens support have confirmed that this happens with their
>>> headsets as well, but they said that Logitech may have a workaround.
>>>
>>> Anyone had any experience with this?
>>>
>>>
>>
>> Good to hair that Logitech Freedom BT Headset works with S55.
>> I can receive calls, but have still problems to make a call.
>> What firmware S55 you are using? (91)
>> When I go in my S55 phone book an dial a number it does not work via
>> headset.
>> Any advice?
>> Best regards Thomas
>>
>
>

Main Menu - Profiles - Headset

Unfortunately it doesnt have any option to auto-divert

"Thomas Schlimper" <forester08@gmx.de> wrote in message
news:335j1fF3r20r5U1@individual.net...
>
> Thanks for you Feedback.
>
> This is a killer feature for me.
> I mean, when the call is not routed to the headset I have to return it.
> Its a must.
>
> What you mean with using Headset profile? In which S55 menu you can edit
> it?
> Best regards Thomas
>
> "Jabba" <cymry2002@notmail.com> schrieb im Newsbeitrag
> news:5zezd.88184$K7.21790@news-server.bigpond.net.au...
>>I was using the previous firmware but upgraded to 91 tonight. Siemens &
>>Logitech have confirmed that even when using the Headset Profile, a call
>>dialled on the handset will not automatically be routed through the
>>headset. You have to wait till the call connects, then select <phone
>>symbol> menu, then 'call to handsfree'
>>
>> Alternatively you can call using voice commands to previously recorded
>> entries in your address book
>>
>> "Thomas Schlimper" <forester08@gmx.de> wrote in message
>> news:33549gF3ttsv8U1@individual.net...
>>>
>>> "Jabba" <cymry2002@notmail.com> schrieb im Newsbeitrag
>>> news:kyNwd.76788$K7.43241@news-server.bigpond.net.au...
>>>> I recently purchased a Logitech Mobile Freedom Headset top use with my
>>>> Siemens S55 via Bluetooth. Set it up, works perfectly in that I can
>>>> answer calls using the headset and make calls from the headset by voice
>>>> command (pre-stored entries)
>>>> My question is with being able to dial a number on my handset and have
>>>> it automatically come through the headset. I have enabled 'Headset'
>>>> profile but this doesn't do it automatically. I have to allow the call
>>>> to connect, and then select/transfer 'call to headset' on the menu that
>>>> appears. Siemens support have confirmed that this happens with their
>>>> headsets as well, but they said that Logitech may have a workaround.
>>>>
>>>> Anyone had any experience with this?
>>>>
>>>>
>>>
>>> Good to hair that Logitech Freedom BT Headset works with S55.
>>> I can receive calls, but have still problems to make a call.
>>> What firmware S55 you are using? (91)
>>> When I go in my S55 phone book an dial a number it does not work via
>>> headset.
>>> Any advice?
>>> Best regards Thomas
>>>
>>
>>
>
>