Re: Nokia 3595 Data Cable Problem

I have a data cable and could not use because the battery would not fit
after placing the cable in the phone. How does that work?
Marcia
"Gadgetgirl" <gadgetgirl_1@yahoo.com> wrote in message
news:cj2scq$uhg$1@news.netins.net...
>
> Wendy <kelly94@charter.net> wrote in message
> news:c49a95b4.0409241854.2616c3b5@posting.google.c om...
>> I purchased a serial data cable for my 3595 off ebay and I need help!
>> I have Oxygen Phone Manger 2.2.0. It keeps saying my phone isn't
>> connected. Do I need a driver? If so, where do I get it? Am I doing
>> something wrong? Is this version of Oxygen even compatable with my
>> phone? Please help! Thanks )
>
> 1st - do you have the correct connect port listed in the option area of
> the
> program?
>
> Mine wasn't listed for my 3595 so I had to hit the "ADD" button. And then
> click one of the ports listed in it. If the 1st port choices isn't the
> correct port try another until it does captures your phone.
>
> If that isn't it try the following -
>
> Your cable might be a older version.(mine was) I read it in here 1 time
> that
> some of the older cables. You need to take the part that connects to your
> phone apart. And on the inside there is a small spring. Take this out
> and
> then screw it back together and try it that way.
>
> I did this and my computer sees my phone as soon as I connect my phone
> right
> after I hook it up.
>
> Hope this helps Good luck
>
> GADGETGIRL
>
>
>
>

"MVJones" <mukemu@yahoo.com> wrote in message
news:WHTcd.5$mn5.0@bignews5.bellsouth.net...
> I have a data cable and could not use because the battery would not fit
> after placing the cable in the phone. How does that work?
> Marcia

Do you have the battery seated all the way back in the cable part?
I so, then put the opposite end of the battery in first (the connector end)
the put the cable end in next. On mine I have to usually hold the cable
part in
because it sometimes pops out.

Hope this helps

Gadgetgirl

> "Gadgetgirl" <gadgetgirl_1@yahoo.com> wrote in message
> news:cj2scq$uhg$1@news.netins.net...
> >
> > Wendy <kelly94@charter.net> wrote in message
> > news:c49a95b4.0409241854.2616c3b5@posting.google.c om...
> >> I purchased a serial data cable for my 3595 off ebay and I need help!
> >> I have Oxygen Phone Manger 2.2.0. It keeps saying my phone isn't
> >> connected. Do I need a driver? If so, where do I get it? Am I doing
> >> something wrong? Is this version of Oxygen even compatable with my
> >> phone? Please help! Thanks )
> >
> > 1st - do you have the correct connect port listed in the option area of
> > the
> > program?
> >
> > Mine wasn't listed for my 3595 so I had to hit the "ADD" button. And
then
> > click one of the ports listed in it. If the 1st port choices isn't the
> > correct port try another until it does captures your phone.
> >
> > If that isn't it try the following -
> >
> > Your cable might be a older version.(mine was) I read it in here 1 time
> > that
> > some of the older cables. You need to take the part that connects to
your
> > phone apart. And on the inside there is a small spring. Take this out
> > and
> > then screw it back together and try it that way.
> >
> > I did this and my computer sees my phone as soon as I connect my phone
> > right
> > after I hook it up.
> >
> > Hope this helps Good luck
> >
> > GADGETGIRL
> >
> >
> >
> >
>
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.778 / Virus Database: 525 - Release Date: 10/15/04